New Cyrix-Li-charge 12/24V-120A intelligent charge relay

Used 10kg FOB Anchor No bends or gauges but some rust spots. Good secondary anchor since it stows very flat Phone Number Thai 0813015524 ภาษาไทย) (สำหรับการต่อรองราคาหรือการสอบถามรายละเอียดทางเทคนิค อย่าโทรเบอร์นี้ กรุณาส่งไลน์มาที่เบอร์นี้หรือส่งข้อความมาแทน)

New and unused Profurl Spinex 1.5 Top Down Furler ( V1)- including 17 meter of torsion cable Cost in the US is about 2250$ to 2750$ + shipping + import tax or around 110.000 - 120.00 Baht Profurl Spinex 1.5 Top Down Furler - Boats up to 35' The advantages to using ProFurl's Spinex Sail Bearing Technology: Efficient, Reliable Furling Problem: Because asymmetric spinnaker cloth is both light and fragile, the anti-twist cable has a tendency to damage it. Also, the cable spins faster than the sail during furling which means the sail sometimes jams. ProFurl's solution: Sail Bearing Technology comprises high-density spheres that spin freely around the anti-twist cable in order to protect the sail from the cable. Sail Bearing Technology allows you to: keep the sail away from the cable stop reverse furling, which causes the sail to jam reduce wear of the sailcloth make furling easier and faster because it has a greater diameter than the cable on its own A Complete System Ready to Use: SPINEX comes with drum, swivel, cable, end fittings, tack swivel, etc. Except for the length of the cable, SPINEX is ready to fit and ready to use out of the box. Multi-Purpose and Adaptable Remove the tack swivel and turn your SPINEX into a NEX ready to use with gennakers and code zeros. Profurl's SPIN KIT fits on NEX furlers. Other Advantages: Compatible with NEX technology, such as I-Connect, Safe System, etc. Improved safety when worked from the cockpit or short-handed. Requires little storage space. System compatible with all types of asymmetric spinnakers. SPINEX Contents: Nex spool and swivel Anti-twist cable with spheres Tack swivel End fittings Profurl Spinex 1.5 Top Down Furler Technical Specifications

Like new Groco Thru-Hull Fitting Installation Tool used only for the installation of 6 through hulls and comes with original packing and no damages or scratches Allows a Single Person to Install Thru-Hull Fittings Fits: 1/2"-3" Thru-Hull Fittings Not for the Removal of Old Thru-Hull Fittings Features: Simplifies thru-hull installation Saves time Works with thru-hulls 1/2"-3" The Groco thru-hull installation tool makes installing new thru-hull fittings a simple one person task How it Works: Simply slide the flanged end of the thru-hull over the tool Tie a length of monofilament line to the eye and thread it through the hole in the hull and through the thru-hull lock nut or seacock Caulk the flange of the fitting, then pull it tight to the hull and screw the thru-hull to the fitting Note: Not for the removal of old thru-hull fittings Phone Number Thai 0813015524 ภาษาไทย) (สำหรับการต่อรองราคาหรือการสอบถามรายละเอียดทางเทคนิค อย่าโทรเบอร์นี้ กรุณาส่งไลน์มาที่เบอร์นี้หรือส่งข้อความมาแทน)

Unused 9 pcs of Marine Bronce Hexbolts size 5/16 - 18 x 3/4" this is the size which will fit for the Groco Backing blocks with their threaded inserts. 9 pcs is sufficient for 3 seacooks Phone Number Thai 0813015524 ภาษาไทย) (สำหรับการต่อรองราคาหรือการสอบถามรายละเอียดทางเทคนิค อย่าโทรเบอร์นี้ กรุณาส่งไลน์มาที่เบอร์นี้หรือส่งข้อความมาแทน)