Close nav

Marine engine exhaust anti-siphon loop device (new)

Ad Description

Exhaust anti-siphon loop and breaker valve kit supplied with hose tails for a complete hose line anti-siphon installation. This kit is supplied with the following parts to create a working anti-siphon device:

1 x brass loop with two 3/4" BSPF ports and one 1/2" BSPF port (410014)
1 x brass siphon valve with one 1/2" BSPM and one 3/8" BSPF port (410043)
2 x brass 3/4" BSPM to 19mm hose tails (404045)

Once assembled, these give a complete anti-siphon device suitable for 19mm hose lines and a 10mm vent hose. This will only allow water to flow in the intended direction and will create a vacuum if the flow is reversed. Typical installations for an anti-siphon device are sea water intakes, exhaust injection lines and toilet systems where the equipment installed is below the waterline.

Hose Tail Size 19mm / 3/4"
Country of Origin Italy
With Valve Yes
Construction Brass bend and hosetails. Valve is brass with a rubber valve
Hose Size Suits ID: 19mm (3/4") (with (3/8") connection for vent line)

Solid brass 2500 baht each ( one sold ,one available )
Similar ads
Pair of CLEAVER S/S props for SALE

Pair of CLEAVER S/S props for SALE

  • 01 Oct 2024 : 12:48 pm

Left and right handed, 3 blade, 15 inch diameter x 22 inch pitch. Compatible with MERCRUISER ALPHA + BRAVO 1 drive. Used but in good condition, no edge damage. New they cost app. 1,500 USD each. Free shipping throughout Thailand with optional COD. Advertised price is for a pair, fixed and not negotiable. Please read the ad carefully and make sure you really want this item BEFORE engaging in conversation ! No time wasters please !

Aqua Signal - All-In-One Navigation Light Switch (reduced)

Aqua Signal - All-In-One Navigation Light Switch (reduced)

  • 17 Oct 2024 : 20:05 pm

Aqua Signal nav-switch is an ingenious multi-switch for clear and fault-free operation of navigation-, deck- and instrument lighting. An easy to install solution for safety on board. The Nav-Switch can be placed anywhere on the boat, for example on the steering station, where decisions are made. The respectively prescribed navigation lighting for moving under sail power (the sail symbol), or if the boat is under way, motor driven (the propeller symbol) or when at anchor (the anchor symbol) can be directly altered using the switch. The instrument lighting is also switched on at the same time as the navigation lighting. A function lighting (eg., deck illumination) can be switched on or off in every switch position by pulling on or pressing on the Nav-Switch. Protection Degree -IP66 Mounting -Recessed mounting Electric 12 Vdc or 24 Vdc Brand new in original packaging

Close